Saltar al contenido principal

Introducción

For frisbee owners, a warped disc is a common problem due to prolonged sun exposure or moderate wear over time. For most discs, this warping can often be undone with some gentle manipulation. This fix involves a simple set up, and then letting the frisbee sit for approximately 1 hour.

Partes

No se especificaron partes.

  1. Place the frisbee disc on a flat surface with the concave side facing up. Lay a towel down flat over the frisbee. Place the frisbee disc on a flat surface with the concave side facing up. Lay a towel down flat over the frisbee.
    • Place the frisbee disc on a flat surface with the concave side facing up. Lay a towel down flat over the frisbee.

  2. Take the bowl and fill halfway full with water. Microwave until water is boiling.
    • Take the bowl and fill halfway full with water. Microwave until water is boiling.

    • The bowl will be hot, so handle it with care.

  3. Take the bowl with boiling water and place it on top of the frisbee and the towel.
    • Take the bowl with boiling water and place it on top of the frisbee and the towel.

  4. Add a textbook as a weight to sit on top of the bowl.
    • Add a textbook as a weight to sit on top of the bowl.

    • Let everything sit for 1 hour

  5. Remove any weights, the bowl, and the towel. Check to see if the disc is still warped.
    • Remove any weights, the bowl, and the towel. Check to see if the disc is still warped.

    • If it is still warped repeat this process one more time.

Conclusión

The time taken to fix the warping on your frisbee may vary based on how thick the plastic is.

2 personas más completaron esta guía.

Bryce Petersen

Miembro Desde 09/04/15

164 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 30-5, Green Spring 2015 Miembro de Cal Poly, Team 30-5, Green Spring 2015

CPSU-GREEN-S15S30G5

5 Miembros

23 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 18

Ultimos 30 días: 152

Todo El Tiempo: 6,374