Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Introducción

The Auto Boot feature powers on your laptop as soon as you open the lid, so it must be disabled before undertaking certain repairs. Auto Boot can be found on 2016 (and newer) MacBook Pros and 2017 (and newer) 12" Retina MacBooks.

This guide will walk you through the process of disabling Auto Boot, and then re-enabling it when your repair is complete.

  1. Power on your Mac and launch Terminal. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.
    • Power on your Mac and launch Terminal.

    • To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.

  2. Copy and paste the following command (or type it exactly) into Terminal: sudo nvram AutoBoot=%00
    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%00

    • Press [return].

    • Your [return] key may also be labeled ⏎ or [enter].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

  3. Kits para Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kits para Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  4. You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.
    • You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.

    • Remember, you must still disconnect the battery before servicing internal components.

  5. When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature. Power on your Mac and launch Terminal. Copy and paste the following command (or type it exactly) into Terminal:
    • When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature.

    • Power on your Mac and launch Terminal.

    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%03

    • Press [return].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

    • Alternatively, you may reset your Mac's NVRAM to re-enable Auto Boot.

Conclusión

Congrats! You're done.

8 personas más completaron esta guía.

Jeff Suovanen

Miembro Desde 06/08/13

269,424 Reputación

237 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

107 Miembros

10,209 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 20

Ultimos 7 días: 143

Ultimos 30 días: 596

Todo El Tiempo: 8,168