Repara tus cosas Comunidad Tienda

How to Clean the Fan on a Toshiba TDP-XP2

Introducción

Fans on electronic devices collect a lot dust over the years, so this guide will show how to clean the fan on this Toshiba projector in order to prevent overheating. To ensure maximum performance out of a fan, some oil can be added to keep the bearings lubricated and running in tip-top shape.

Qué necesitas

  1. How to Clean the Fan on a Toshiba TDP-XP2, How to Clean the Fan on a Toshiba TDP-XP2: paso 1, imagen 1 de 2 How to Clean the Fan on a Toshiba TDP-XP2, How to Clean the Fan on a Toshiba TDP-XP2: paso 1, imagen 2 de 2

    • Remove the two screws from the bottom plate as shown.

    Editar

  2. How to Clean the Fan on a Toshiba TDP-XP2: paso 2, imagen 1 de 1

    • Remove the two screws on the bulb housing.

    Editar

  4. How to Clean the Fan on a Toshiba TDP-XP2: paso 3, imagen 1 de 1

    • Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.

    Editar

  5. How to Clean the Fan on a Toshiba TDP-XP2: paso 4, imagen 1 de 1

    • Using a can of compressed air, blow on the fan until all dust is gone.

    • Oil can be added in with a dropper on the bearing if needed.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Bryan Underwood

Miembro Desde 04/02/18

697 Reputación

5 Guías creadas

Insignias: 3

Equipo

University of Memphis, Team S1-G3, Kim Spring 2018 Miembro de University of Memphis, Team S1-G3, Kim Spring 2018

UM-KIM-S18S1G3

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 10

Todo El Tiempo: 409