How to Buff an Apple Watch

Introducción

Bring life back to your Apple Watch with a brand new, out of the box look following these steps. This guide instructs you to remove scratches from the stainless steel casing of an apple watch. It is intended to clean scratches off safely without damaging any sensitive parts.

Parts Needed

1x Pair of rubber gloves

1x Microfiber Cloth

1x Cape Cod Polishing Cloth

Qué necesitas

Paso 1 How to Buff an Apple Watch

How to Buff an Apple Watch, How to Buff an Apple Watch: paso 1, imagen 1 de 2

How to Buff an Apple Watch, How to Buff an Apple Watch: paso 1, imagen 2 de 2

Flip the watch over so it is face down.

Editar

Paso 2

How to Buff an Apple Watch: paso 2, imagen 3 de 3

Remove the straps by pressing the button adjacent to each side and sliding the band right out.

Editar

Paso 3

Herramienta utilizada en este paso:

Microfiber Cleaning Cloths

$3.99

Comprar

Clean the watch with a microfiber cloth.
Make sure all smudges are removed at this point.

Editar

Paso 4

How to Buff an Apple Watch: paso 4, imagen 3 de 3

Put on Gloves. Using a polishing cloth, which is already soaked with polishing cream, rub one side of the watch back and forth.
Repeat on each side of the watch.
When using the polishing cloth, do NOT go directly over the microphone or the speaker.
If the polishing cloth begins to turn black while you are wiping, do not be alarmed. The blackness is just layers of dirt coming off the watch.

Editar

Paso 5

Grab your microfiber cloth and go over the same area that you previously wiped until the residue is gone and you have restored the side to it’s previous mirror finish.
Repeat on each side of the watch.

Editar