Saltar al contenido principal

How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes

Qué necesitas

  1. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes, How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 1, imagen 1 de 1
    • You will see a cable attached to an Allen bolt.

  2. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 2, imagen 1 de 1
    • Loosen up the bolt with the help of Hex key set.

  3. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 3, imagen 1 de 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 3, imagen 2 de 2
    • Now, pull the cable as much as you can.

  4. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 4, imagen 1 de 1
    • Tighten up the bolt while you keep pulling the cable.

  5. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 5, imagen 1 de 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 5, imagen 2 de 2
    • To center the caliper for a smooth breaking experience, loosen up the two bolts of the brake situated at top and at bottom.

  6. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 6, imagen 1 de 1
    • Now, put the brake on.

  7. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 7, imagen 1 de 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 7, imagen 2 de 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: paso 7, imagen 3 de 3
    • While putting the brake on, tighten up both the bolts.

    • You are finished adjusting the brakes!

Linea de Meta

2 personas más completaron esta guía.

Un comentario

Dude, the cable is attached incorrectly. The cable routes up and over the little arm.

Grandy - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 10

Ultimos 7 días: 43

Ultimos 30 días: 210

Todo El Tiempo: 4,253