Saltar al contenido principal

Introducción

After years of use, you might need to replace the Klickfix mounting plate on your Aqua Box. It just takes a few steps—read on to find out how.

  1. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.
    • Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.

  2. Replace the defective plate with the new plate.
    • Replace the defective plate with the new plate.

Conclusión

To finish the repair follow the instructions in reverse order.

Un agradecimiento especial a estos traductores:

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

VAUDE Reparaturteam

Miembro Desde 22/02/16

5,468 Reputación

31 Guías creadas

Equipo

Vaudesport Miembro de Vaudesport

Community

3 Miembros

62 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 9

Todo El Tiempo: 395