Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Start by removing the stylus from the frame of the New 3DS XL.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Loosen the two captive Phillips #1 screws on the back of the device.
-
Prying from the thumb slots on each side, pull the rear panel off the back of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Press the microSD card slightly deeper into its slot until you hear a click.
-
After the click, release the card and it will pop out of its slot.
-
Use a PC to copy the data from the source SD card to the New 3DS XL microSD card.
-
You may need a micro SD to SD adapter.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.
Un comentario
Can anyone who's actually tried the text portion of this guide confirm whether it works? As I understand it, all the data on a 3ds is encrypted with a console-specific key (movable.sed) to prevent exactly this. If it actually worked like this, wouldn't it defeat copy protection almost entirely since any o3ds encrypted ROM could just be copied as-is to a n3ds and run normally?
