Repara tus cosas Comunidad Tienda

How To Repair An Overheating D-LINK DIR-655 Wireless Router

Introducción

Have you noticed your wireless router is overheating and shutting off? This can be caused by dust blocking the vents or gathering on the heatsinks. Use this guide to disassemble and clear out your router to get it back in working order.

Qué necesitas

  1. How To Repair An Overheating D-LINK DIR-655 Wireless Router, How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 1, imagen 1 de 2 How To Repair An Overheating D-LINK DIR-655 Wireless Router, How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 1, imagen 2 de 2

    • Start by removing the three antennas by twisting each one in a counter-clockwise direction when facing the back panel.

    Editar

  2. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 2, imagen 1 de 2 How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 2, imagen 2 de 2

    • Using your flathead screwdriver or plastic opening tool, gently pry the top two screw covers out of the router's case.

    Editar

  3. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 3, imagen 1 de 3 How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 3, imagen 2 de 3 How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 3, imagen 3 de 3

    • Using your Phillips screwdriver, turn the screw counter-clockwise to remove it from the assembly.

    • Do the same for the second screw.

    Editar

  5. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 4, imagen 1 de 1

    • Gently pry the top of the case from the sides and bottom of the router.

    • After freeing the top, remove it and set it aside.

    Editar

  6. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 5, imagen 1 de 2 How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 5, imagen 2 de 2

    • With your Phillips screwdriver, remove both screws by rotating in a counter-clockwise direction.

    Editar

  7. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 6, imagen 1 de 1

    • After removing the screws, lift the white LED cover up and off of the circuit board.

    Editar

  8. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 7, imagen 1 de 3 How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 7, imagen 2 de 3 How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 7, imagen 3 de 3

    • Next, bend up the clip holding down the middle antenna wire.

    • Gently, unhook the wire and move it out of the way.

    Editar

  9. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 8, imagen 1 de 1

    • With the wire out of the way, separate the circuit board from the bottom assembly.

    • Be sure not to pinch or bend the antenna wire when you lift the circuit board.

    Editar

  10. How To Repair An Overheating D-LINK DIR-655 Wireless Router: paso 9, imagen 1 de 1

    • Wipe away any dust from the the vents to ensure proper airflow.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Chance Daniel

Miembro Desde 09/29/15

263 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

Cal Poly, Team 10-6, Green Fall 2015 Miembro de Cal Poly, Team 10-6, Green Fall 2015

CPSU-GREEN-F15S10G6

3 Miembros

3 Guías creadas

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 2

Ultimos 30 días: 16

Todo El Tiempo: 5,437