Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Hover-1 Superstar Bottom Case Replacement

Introducción

In order to access the internal components of the Hover-1 Superstar, the bottom case must first be unscrewed and removed. This guide will explain the process of removing the bottom case from the Hover-1 Superstar.

Qué necesitas

  1. Hover-1 Superstar Bottom Case Replacement, Bottom Case: paso 1, imagen 1 de 3 Hover-1 Superstar Bottom Case Replacement, Bottom Case: paso 1, imagen 2 de 3 Hover-1 Superstar Bottom Case Replacement, Bottom Case: paso 1, imagen 3 de 3

    • Flip your Hover-1 Superstar device upside down.

    • Using a Phillips #1 screwdriver, remove all twenty of the 18mm screws holding the case onto the device.

    • Remove the bottom case. Be careful of the connector holding the case and the device together.

    Traducir

  3. Hover-1 Superstar Bottom Case Replacement: paso 2, imagen 1 de 1

    • Locate the cable connected to the front lights.

    • Pull apart the wires until the black clip separates.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 355