Saltar al contenido principal

Hover-1 Rally Brake Switch Replacement

Qué necesitas

  1. Hover-1 Rally Brake Switch Replacement, Brake Switch: paso 1, imagen 1 de 1
    • Rotate and pull the left handle to unscrew it from the handlebar.

    • This will expose the brake switch.

  2. Hover-1 Rally Brake Switch Replacement: paso 2, imagen 1 de 1
    • Remove four 2 mm Phillips #00 screws located on the brake switch.

  3. Hover-1 Rally Brake Switch Replacement: paso 3, imagen 1 de 1
    • Pull the brake switch off of the handlebar.

    • The brake switch sits perpendicular to the handlebar.


To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Cami Lowrey

Miembro Desde 02/07/20

441 Reputación

3 Guías creadas


Cal Poly, Team S7-G2, Regan Winter 2020 Miembro de Cal Poly, Team S7-G2, Regan Winter 2020


6 Miembros

7 Guías creadas

Un comentario

Hi good afternoon. I have a Rally H-1 scooter. It seems that my front wheel motor is messed up. But I can't find any parts fvor this scooter. I went on Hoover 1 website. But they don't have any parts available.

colebyauto - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 13

Todo El Tiempo: 374