Saltar al contenido principal

Hover-1 Maverick Motherboard Replacement

Qué necesitas

  1. Hover-1 Maverick Motherboard Replacement, Motherboard: paso 1, imagen 1 de 3 Hover-1 Maverick Motherboard Replacement, Motherboard: paso 1, imagen 2 de 3 Hover-1 Maverick Motherboard Replacement, Motherboard: paso 1, imagen 3 de 3
    • Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

    • Open the shell.

    • There is one motherboard on each side of the device located near the wheels.

  2. Hover-1 Maverick Motherboard Replacement: paso 2, imagen 1 de 2 Hover-1 Maverick Motherboard Replacement: paso 2, imagen 2 de 2
    • Disconnect the battery to prevent any electrical currents from coming through the wires.

  3. Hover-1 Maverick Motherboard Replacement: paso 3, imagen 1 de 2 Hover-1 Maverick Motherboard Replacement: paso 3, imagen 2 de 2
    • Squeeze and pull on the wires to detach them from the motherboard.

  4. Hover-1 Maverick Motherboard Replacement: paso 4, imagen 1 de 2 Hover-1 Maverick Motherboard Replacement: paso 4, imagen 2 de 2
    • Remove the four 8mm Phillips #1 screws.

    • Remove the motherboard from the device.

    • Repeat for the other motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

Cal Poly, Team S7-G2, Paton Spring 2020 Miembro de Cal Poly, Team S7-G2, Paton Spring 2020

CPSU-PATON-S20S7G2

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 33

Todo El Tiempo: 2,377