Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the hoverboard over so the labels are facing upwards.
-
Remove the twenty 18mm screws using a Phillips #2 screwdriver and twisting counterclockwise.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the bottom cover by lifting it away from the hoverboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove one connector from the non-battery side circuit board.
-
Remove the next connector from the non-battery side circuit board.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
2 comentarios
I'm gettin nothin at all.. Charger is green.. But absolutely nothing when press the on button.. All the cables are connected.. No lights or anythin.. Can anyone help.
I am getting the 5 red lights. I have followed all the instructions. Is there a site to buy the motherboards that are burned out? Is it financially worth buy both boards and replacing them?
-Christopher Fields, Network Engineer, PC Repair, Grantsville, UT