Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the six 12mm Phillips #2 screws holding the base plate.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 11mm Phillips #1 screws that hold the base plate to the body.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Reorient the Hover-1 Horizon so the base plate opens towards you.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the connector by squeezing the tab and lifting up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the second connector by squeezing the tab and pulling up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the power button by holding the front and twisting the back nut counter-clockwise.
-
Push the power button through the base plate to remove.
-