Repara tus cosas Comunidad Tienda

Hover-1 H1 Battery Replacement

Introducción

Replacing in the battery in your Hover-1 H1 hoverboard might help to solve charging problems.

Qué necesitas

  1. Hover-1 H1 Battery Replacement, Bottom Shell: paso 1, imagen 1 de 1

    • Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

    • Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

    Editar

  2. Hover-1 H1 Battery Replacement: paso 2, imagen 1 de 1

    • Puncture the two black stickers by using the tip of a screwdriver.

    • Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

    Editar

  4. Hover-1 H1 Battery Replacement: paso 3, imagen 1 de 2 Hover-1 H1 Battery Replacement: paso 3, imagen 2 de 2

    • Lift each side of the bottom shell by pulling up.

    • When lifting the shell, take care to not tear any cables from their connectors.

    Editar

  5. Hover-1 H1 Battery Replacement: paso 4, imagen 1 de 1

    • Unplug the battery by pulling gently on both sides of the orange connector.

    Editar

  6. Hover-1 H1 Battery Replacement, Battery: paso 5, imagen 1 de 1

    • Remove the four 7mm screws by using a Phillips #2 screwdriver to rotate the screws counterclockwise.

    Editar

  7. Hover-1 H1 Battery Replacement: paso 6, imagen 1 de 1

    • Gently lift the battery harness and remove the battery by lifting the battery and moving it away from the hoverboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Aaron Teh

Miembro Desde 10/08/18

442 Reputación

2 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team S17-G6, White Fall 2018 Miembro de Cal Poly, Team S17-G6, White Fall 2018

CPSU-WHITE-F18S17G6

4 Miembros

7 Guías creadas

11 comentarios

The stickers were the trick. I didn’t see them!

Daniel D - Contestar

After removing the 4 screws that is holding the battery in place I still can't remove the battery. I tried gently to pry under the battery but it doesn't budge. Uni Sun model HY-A01B. How do I solve this problem?

Terry Pollard - Contestar

Where do I get another battery to replace it???

Tony Pate - Contestar

That's the question I can't seem to find the answer to

Darin -

Very low quality. Bought for my son who haven’t even used it for 15 times. Got it during winter and before summer the product stopped working.

tosin3in1 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 42

Ultimos 30 días: 193

Todo El Tiempo: 8,862