Repara tus cosas Comunidad Tienda

Hover-1 Folding E-Scooter Rear Wheel Replacement

Introducción

This guide is created to replace a damaged or broken back wheel. Tools required are a Hex Bit 4.0 tool, a bit extender, and an allen key.

Qué necesitas

  1. Hover-1 Folding E-Scooter Rear Wheel Replacement, Rear Wheel: paso 1, imagen 1 de 2 Hover-1 Folding E-Scooter Rear Wheel Replacement, Rear Wheel: paso 1, imagen 2 de 2

    • Remove either of the two 0.2 mm axle screws by using a hex bit 4.0 by turning clockwise.

    • The two screws are the same thread so find the screw that has the least torque. Only that screw will be able to removed in this step.

    • Turn the hex bit 4.0 counterclockwise to reassemble the axle screws.

    Editar

  2. Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 2, imagen 1 de 3 Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 2, imagen 2 de 3 Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 2, imagen 3 de 3

    • Slide off the plastic side panel.

    Editar

    What is the Pat number of this plastic side panel?

    bobdub - Contestar

  4. Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 3, imagen 1 de 1

    • Use a hex bit 4.0 to screw back in the 0.2 mm screw as tightly as possible by turning clockwise.

    • You will need to hold the other screw you are not replacing with an additional hex bit 4.0, so that the screws don't spin freely.

    Editar

  5. Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 4, imagen 1 de 1

    • Flip over the scooter and use the hex bit 4.0 to remove the other 0.2 mm screw.

    Editar

  6. Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 5, imagen 1 de 3 Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 5, imagen 2 de 3 Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 5, imagen 3 de 3

    • Slide off the other plastic side panel.

    Editar

  7. Hover-1 Folding E-Scooter Rear Wheel Replacement: paso 6, imagen 1 de 1

    • On the same side you removed the screw, use the bit extender to push down on the axle inside the wheel.

    • The axle pops out and the wheel easily comes off.

    • Two washers will pop out with the axle.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Luke Imai

Miembro Desde 10/08/18

133 Reputación

1 Guía escrita

Insignias: 2

Equipo

Cal Poly, Team S15-G5, White Fall 2018 Miembro de Cal Poly, Team S15-G5, White Fall 2018

CPSU-WHITE-F18S15G5

4 Miembros

5 Guías creadas

2 comentarios

Where can you get replacement rubber for the front and rear wheels?

jackricotta - Contestar

How about adding a rear wheel removal article for the Hover-1 Alpha folding scooter?

sfaheysd - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 12

Ultimos 30 días: 37

Todo El Tiempo: 5,157