Saltar al contenido principal

Introducción

This guide is created to replace a damaged or broken back wheel. Tools required are a Hex Bit 4.0 tool, a bit extender, and an allen key.

Partes

No se especificaron partes.

  1. Remove either of the two 0.2 mm axle screws by using a hex bit 4.0 by turning clockwise. The two screws are the same thread so find the screw that has the least torque. Only that screw will be able to removed in this step.
    • Remove either of the two 0.2 mm axle screws by using a hex bit 4.0 by turning clockwise.

    • The two screws are the same thread so find the screw that has the least torque. Only that screw will be able to removed in this step.

    • Turn the hex bit 4.0 counterclockwise to reassemble the axle screws.

  2. Slide off the plastic side panel. Slide off the plastic side panel. Slide off the plastic side panel.
    • Slide off the plastic side panel.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Use a hex bit 4.0 to screw back in the 0.2 mm screw as tightly as possible by turning clockwise.
    • Use a hex bit 4.0 to screw back in the 0.2 mm screw as tightly as possible by turning clockwise.

    • You will need to hold the other screw you are not replacing with an additional hex bit 4.0, so that the screws don't spin freely.

  5. Flip over the scooter and use the hex bit 4.0 to remove the other 0.2 mm screw.
    • Flip over the scooter and use the hex bit 4.0 to remove the other 0.2 mm screw.

  6. Slide off the other plastic side panel. Slide off the other plastic side panel. Slide off the other plastic side panel.
    • Slide off the other plastic side panel.

  7. On the same side you removed the screw, use the bit extender to push down on the axle inside the wheel.
    • On the same side you removed the screw, use the bit extender to push down on the axle inside the wheel.

    • The axle pops out and the wheel easily comes off.

    • Two washers will pop out with the axle.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Luke Imai

Miembro Desde 08/10/18

133 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S15-G5, White Fall 2018 Miembro de Cal Poly, Team S15-G5, White Fall 2018

CPSU-WHITE-F18S15G5

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 15

Todo El Tiempo: 82