Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Find the Socket wrench located in the Hover-1 Coast packaging.
-
Use the 9/16 inch side to loosen the skateboard nut by turning counterclockwise.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the nut off the axle.
-
Remove the washer off the axle.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To avoid losing any parts, place them on a flat surface.
-
Slide the unwanted wheel off the axle.
-
Slide the new wheel on the axle.
-