Saltar al contenido principal

Hover-1 Coast Wheel Replacement

Qué necesitas

  1. Hover-1 Coast Wheel Replacement, Wheel: paso 1, imagen 1 de 1
    • Identify the wheel you are wanting to replace.

  2. Hover-1 Coast Wheel Replacement: paso 2, imagen 1 de 2 Hover-1 Coast Wheel Replacement: paso 2, imagen 2 de 2
    • Find the Socket wrench located in the Hover-1 Coast packaging.

    • Use the 9/16 inch side to loosen the skateboard nut by turning counterclockwise.

  3. Hover-1 Coast Wheel Replacement: paso 3, imagen 1 de 3 Hover-1 Coast Wheel Replacement: paso 3, imagen 2 de 3 Hover-1 Coast Wheel Replacement: paso 3, imagen 3 de 3
    • Remove the nut off the axle.

    • Remove the washer off the axle.

  4. Hover-1 Coast Wheel Replacement: paso 4, imagen 1 de 3 Hover-1 Coast Wheel Replacement: paso 4, imagen 2 de 3 Hover-1 Coast Wheel Replacement: paso 4, imagen 3 de 3
    • To avoid losing any parts, place them on a flat surface.

    • Slide the unwanted wheel off the axle.

    • Slide the new wheel on the axle.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 407