Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Hover-1 Chrome Outer Shell Replacement

Introducción

To fully access all parts of the Hover-1 Chrome, the entirety of the outer shell must be removed. This guide will go over how to completely remove the outer shell.

Qué necesitas

  1. Hover-1 Chrome Outer Shell Replacement, Hover-1 Chrome Disassembly: paso 1, imagen 1 de 1

    • Flip the Hover-1 Chrome upside down.

    • Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.

    • Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

    Traducir

  2. Hover-1 Chrome Outer Shell Replacement: paso 2, imagen 1 de 1

    • Lift the shell without the speaker grille and unplug the battery.

    Traducir

  3. Hover-1 Chrome Outer Shell Replacement: paso 3, imagen 1 de 2 Hover-1 Chrome Outer Shell Replacement: paso 3, imagen 2 de 2

    • Lift the shell with the speaker grille.

    • Unplug the speaker.

    • Unplug the LEDs.

    • Unplug the power button

    • Unplug the charging port.

    Traducir

  5. Hover-1 Chrome Outer Shell Replacement, Outer Shell: paso 4, imagen 1 de 1

    • Remove the twelve 14 mm Phillips #2 screws holding the top shell on.

    • The other six screws are on the side without the battery.

    Traducir

  6. Hover-1 Chrome Outer Shell Replacement: paso 5, imagen 1 de 3 Hover-1 Chrome Outer Shell Replacement: paso 5, imagen 2 de 3 Hover-1 Chrome Outer Shell Replacement: paso 5, imagen 3 de 3

    • Free the cables held atop the bracket holding the battery in place.

    • Remove the four 14 mm Phillips #2 screws holding the battery bracket in place.

    • Pull the battery bracket free.

    Traducir

  7. Hover-1 Chrome Outer Shell Replacement: paso 6, imagen 1 de 1

    • Unplug the cords for the top LEDs.

    • The other side of the board is structurally symmetrical. However instead of going under the battery bracket, these cords go through a zip tie. These cables must be removed from the zip tie in order to continue.

    Traducir

  8. Hover-1 Chrome Outer Shell Replacement: paso 7, imagen 1 de 1

    • Turn the board over and pull the top panel off.

    Traducir
Linea de Meta

Autor

con 2 otros colaboradores

Dylan Prins

Miembro Desde 10/08/18

212 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

Cal Poly, Team S4-G1, White Fall 2018 Miembro de Cal Poly, Team S4-G1, White Fall 2018

CPSU-WHITE-F18S4G1

4 Miembros

6 Guías creadas

Un comentario

Where can i get a replacement shell?

born4roblox - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 316