Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the Hover-1 Chrome upside down.
-
Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.
-
Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the shell without the speaker grille and unplug the battery.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the shell with the speaker grille.
-
Unplug the speaker.
-
Unplug the LEDs.
-
Unplug the power button
-
Unplug the charging port.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the metal spudger end between the blue battery and the adhesive pad that attaches it to the metal body.
-
Use the spudger to pry the battery loose from the adhesive.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull and wiggle the battery completely off of the adhesive using your hands.
-
Remove the battery from the body.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.