Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Hot Wheels AI Intelligent Race System Controller Batteries Replacement

Introducción

If your Hot Wheels AI controller does not turn, try replacing the battery. This guide will assist you if you have any trouble. Before you begin, you will need three brand new AAA batteries and a J0 screwdriver. The steps should be straightforward and fast! Once you replace your battery, you will be racing in no time!

Qué necesitas

  1. Hot Wheels AI Intelligent Race System Controller Batteries Replacement, Controller Batteries: paso 1, imagen 1 de 1

    • Use a JIS #0 screwdriver to unscrew the single battery cover screw.

    Traducir

  3. Hot Wheels AI Intelligent Race System Controller Batteries Replacement: paso 2, imagen 1 de 2 Hot Wheels AI Intelligent Race System Controller Batteries Replacement: paso 2, imagen 2 de 2

    • Remove the old AAA battery from the slot by pressing down on the positive end.

    • Do the same for the other two. Make sure none of the battery slots are damaged.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 285