Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the next six screws and use a #J0 JIS Screw to take them off.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the back-cover off and make sure there are no rust or disconnected wires.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the receiver which is towards the back end of the car.
-
Replace the receiver by disconnecting the wires.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.