Saltar al contenido principal

Introducción

Using your Hot Wheels AI Intelligent Racing system may drain out the battery. Consider replacing them!

Partes

No se especificaron partes.

  1. Use a JIS #1 screwdriver to unscrew the single screw that secures the battery cover on the bottom of the car. Use a JIS #1 screwdriver to unscrew the single screw that secures the battery cover on the bottom of the car.
    • Use a JIS #1 screwdriver to unscrew the single screw that secures the battery cover on the bottom of the car.

  2. Make sure there are no rust or broken springs in the battery slot. Press on the positive end of the battery to either remove or insert.
    • Make sure there are no rust or broken springs in the battery slot.

    • Press on the positive end of the battery to either remove or insert.

  3. Turn on the controller and car to see if the device is responsive.
    • Turn on the controller and car to see if the device is responsive.

Linea de Meta

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 11

Todo El Tiempo: 149