Repara tus cosas Comunidad Tienda

Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement

Introducción

Over time your Hoovers filters will get dirty and may eventually need to be replaced. This guide will show you how to do this in a few easy steps!

  1. Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement, Rinsable Filter: paso 1, imagen 1 de 1

    • Put the cleaner into the upright position, turn off the power and unplug the power cord.

    Editar

  3. Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: paso 2, imagen 1 de 3 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: paso 2, imagen 2 de 3 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: paso 2, imagen 3 de 3

    • Remove the dirt cup from the cleaner.

    • Twist the top of the dirt cup to open it and reveal the rinsable filter.

    Editar

  4. Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: paso 3, imagen 1 de 3 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: paso 3, imagen 2 de 3 Hoover Windtunnel Air Steerable Upright Rinsable and HEPA Filter Replacement: paso 3, imagen 3 de 3

    • Remove the rinsable filter from the dirt cup.

    • If the rinsable filter is dirty, rinse it with water for 2 minutes or until the water runs clear.

    • Squeeze out excess water and allow to dry for 24 hours.

    • Never put a wet filter back into the cleaner.

    Editar
Linea de Meta

Autor

con 4 otros colaboradores

Spencer Nefores

Miembro Desde 09/26/17

201 Reputación

2 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

Cal Poly, Team S7-G2, Banghart Fall 2017 Miembro de Cal Poly, Team S7-G2, Banghart Fall 2017

CPSU-BANGHART-F17S7G2

5 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 16

Todo El Tiempo: 602