Repara tus cosas Comunidad Tienda

Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement

Introducción

Over time your Hoovers filters will get dirty and may eventually need to be replaced. This guide will show you how to do this in a few easy steps!

Qué necesitas

  1. Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement, HEPA Filter: paso 1, imagen 1 de 2 Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement, HEPA Filter: paso 1, imagen 2 de 2

    • Put the cleaner into the upright position, turn the power off, and unplug the power cord.

    Editar

  3. Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement: paso 2, imagen 1 de 3 Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement: paso 2, imagen 2 de 3 Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement: paso 2, imagen 3 de 3

    • Remove the dirt cup from the cleaner.

    • The HEPA filter is located under the dirt cup and under where it says HEPA.

    • Twist the top counterclockwise to unlock the cap.

    Editar

  4. Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement: paso 3, imagen 1 de 2 Hoover Windtunnel Air Steerable Upright HEPA Filter Replacement: paso 3, imagen 2 de 2

    • Lift the HEPA filter out.

    • Tap the filter against the inside of a trashcan to knock out the dirt and debris or replace as necessary.

    • Do not wash the HEPA Filter.

    Editar
Linea de Meta

Autor

con 4 otros colaboradores

Spencer Nefores

Miembro Desde 09/26/17

201 Reputación

2 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

Cal Poly, Team S7-G2, Banghart Fall 2017 Miembro de Cal Poly, Team S7-G2, Banghart Fall 2017

CPSU-BANGHART-F17S7G2

5 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 9

Ultimos 30 días: 40

Todo El Tiempo: 3,004