Repara tus cosas Comunidad Tienda

Hoover WindTunnel 2 Rewind Leaky Hose Replacement

Introducción

The Hoover Windtunnel 2 Rewind's hose sometimes leaks while the vacuum is working. This means that the device needs a new hose. You can find replacement hoses at your local Hoover retailer.

Qué necesitas

  1. Hoover WindTunnel 2 Rewind Leaky Hose Replacement, Leaky Hose: paso 1, imagen 1 de 1

    • Detach the top of the hose from the device by pressing the release button and pulling up on the hose.

    Traducir

  2. Hoover WindTunnel 2 Rewind Leaky Hose Replacement: paso 2, imagen 1 de 1

    • Remove the other end of the hose by twisting the hose clockwise and pulling it off.

    Traducir

  4. Hoover WindTunnel 2 Rewind Leaky Hose Replacement: paso 3, imagen 1 de 1

    • Firmly insert the larger end of the replacement hose into the upward facing hole in the vacuum.

    Traducir

  5. Hoover WindTunnel 2 Rewind Leaky Hose Replacement: paso 4, imagen 1 de 1

    • Line up the smaller end of the hose and insert it into the downward facing hole.

    • Twist the hose until it locks.

    Traducir
Conclusión

The Hoover Windtunnel 2 Rewind must have a solid and functional hose to work correctly. With this set of instructions, it is easy to replace a leaky hose.

6 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Mickey McGuire

Miembro Desde 01/22/18

253 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team S11-G4, Banghart Winter 2018 Miembro de Cal Poly, Team S11-G4, Banghart Winter 2018

CPSU-BANGHART-W18S11G4

5 Miembros

10 Guías creadas

6 comentarios

Thanks, I'm stuck in quarantine and can't go out to get mine fixed, so I'm so glad I found this. Especially since it was just my hose being filled to the brim with dog hair!

Taylore Kirk - Contestar

Same issue. Easy fix thanks!

mark camirand - Contestar

That’s great instructions but it’s not even 8 months old. This has happened from day one!!

Linda Schindler - Contestar

How long does it take to cool off and turn back on after removing the clog?

Victoria Tingwall - Contestar

I took the hose off and unclogged it but the vacuum still isn't turning back on, is there something else that may cause it to not work, or is it because the motor still needs to cool, and how long until it cools?

rpottle - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 27

Ultimos 30 días: 144

Todo El Tiempo: 27,880