Hoover Power Path Pro Advanced Suction Motor Replacement

Introducción

The suction motor is at the core of the proper function of any household floor cleaner. This guide will demonstrate how to properly replace a broken suction motor.

Qué necesitas

Paso 1 Brush Roller

Hoover Power Path Pro Advanced Suction Motor Replacement, Brush Roller: paso 1, imagen 1 de 2

Hoover Power Path Pro Advanced Suction Motor Replacement, Brush Roller: paso 1, imagen 2 de 2

Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.
Lay the cleaner down horizontally with its wheels closest to the floor.

Editar

Paso 2

Hold the lower brush roll with both hands and pull outwards until it is detached.

Editar

Paso 3

Unscrew the 6 marked screws using a Phillips #2 head screwdriver.
Remove the brush roller.

Editar

Paso 4 Belt

Hoover Power Path Pro Advanced Suction Motor Replacement, Belt: paso 4, imagen 1 de 1

Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.

Editar

Paso 5

Pull the red handle shown to remove the front suction unit from the cleaner.

Editar

Paso 6

Unscrew the Phillips #2 screw at the bottom of the hose.

Editar

Paso 7

Push down on the handle release button. Pull and disconnect the edge of the top cover on the side of the handle release button.
Repeat the above step for the "On/Off" button.
When pulling the handle release button, make sure the top of the cleaner does not fall.