Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Honeytone N-10 Mini Amp Speaker Replacement

Introducción

Some soldering will be required in order to complete the speaker replacement.

Qué necesitas

  1. Honeytone N-10 Mini Amp Speaker Replacement, Speaker: paso 1, imagen 1 de 2 Honeytone N-10 Mini Amp Speaker Replacement, Speaker: paso 1, imagen 2 de 2

    • Flip your amp over to begin removing the plastic cover.

    Traducir

  2. Honeytone N-10 Mini Amp Speaker Replacement: paso 2, imagen 1 de 2 Honeytone N-10 Mini Amp Speaker Replacement: paso 2, imagen 2 de 2

    • Remove the battery cover and take the battery out.

    • Unless you want a quick pick-me-up, in which case feel free to leave it in and get shocked.

    Traducir

  3. Honeytone N-10 Mini Amp Speaker Replacement: paso 3, imagen 1 de 2 Honeytone N-10 Mini Amp Speaker Replacement: paso 3, imagen 2 de 2

    • Unscrew the four corner screws using a phillips #0 screw driver to remove the back cover.

    • While the screws are recessed deep into the cover and difficult to see, 2-4 turns will easily release them.

    Traducir

  4. Honeytone N-10 Mini Amp Speaker Replacement: paso 4, imagen 1 de 3 Honeytone N-10 Mini Amp Speaker Replacement: paso 4, imagen 2 de 3 Honeytone N-10 Mini Amp Speaker Replacement: paso 4, imagen 3 de 3

    • Remove the back cover by carefully pushing the battery connector through the hole in the cover.

    Traducir

  6. Honeytone N-10 Mini Amp Speaker Replacement: paso 5, imagen 1 de 3 Honeytone N-10 Mini Amp Speaker Replacement: paso 5, imagen 2 de 3 Honeytone N-10 Mini Amp Speaker Replacement: paso 5, imagen 3 de 3

    • With the phillips #0 screwdriver, unscrew the two white plastic clips that hold the speaker in place.

    Traducir

  7. Honeytone N-10 Mini Amp Speaker Replacement: paso 6, imagen 1 de 2 Honeytone N-10 Mini Amp Speaker Replacement: paso 6, imagen 2 de 2

    • Use flush wire cutters to remove black and red wires from the old speaker.

    • Note: The black wire has already been removed in this example image.

    Traducir

  8. Honeytone N-10 Mini Amp Speaker Replacement: paso 7, imagen 1 de 3 Honeytone N-10 Mini Amp Speaker Replacement: paso 7, imagen 2 de 3 Honeytone N-10 Mini Amp Speaker Replacement: paso 7, imagen 3 de 3

    • Connect the new speaker by soldering the black and red wires to the negative and positive connections respectively

    Traducir

  9. Honeytone N-10 Mini Amp Speaker Replacement: paso 8, imagen 1 de 1

    • Connect the battery and turn the power on to test proper connection of the new speaker.

    • Some static is fine, this is the natural sound of the amp.

    • Careful not to touch any of the metal components inside while temporarily testing the connection.

    Traducir

  10. Honeytone N-10 Mini Amp Speaker Replacement: paso 9, imagen 1 de 1

    • Reverse steps 1-5 to complete repair.

    Traducir

    • Connect the amp to your favorite instrument and test out the new sound!

    Traducir
Linea de Meta

3 personas más completaron esta guía.

Autor

Corey Brown

Miembro Desde 06/24/16

8,679 Reputación

11 Guías creadas

Insignias: 34

+ 31 más insignias

Un comentario

Cool. If mine doesn’t work, is it likely to be the speaker? Thanks.

hupaand - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 15

Todo El Tiempo: 3,486