Repara tus cosas Comunidad Tienda

Holmes HEH8031 Power Cord Replacement

Introducción

This guide will show how to safely remove and replace a faulty power cord on the Holmes HEH8031 space heater.

Qué necesitas

  1. Holmes HEH8031 Power Cord Replacement, Housing: paso 1, imagen 1 de 1

    • Ensure the device is unplugged from the wall outlet.

    Traducir

  2. Holmes HEH8031 Power Cord Replacement: paso 2, imagen 1 de 1

    • Remove eight 12-mm Phillips #2 screws from the back cover.

    Traducir

  4. Holmes HEH8031 Power Cord Replacement: paso 3, imagen 1 de 2 Holmes HEH8031 Power Cord Replacement: paso 3, imagen 2 de 2

    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

    Traducir

  5. Holmes HEH8031 Power Cord Replacement, Power Cord: paso 4, imagen 1 de 3 Holmes HEH8031 Power Cord Replacement, Power Cord: paso 4, imagen 2 de 3 Holmes HEH8031 Power Cord Replacement, Power Cord: paso 4, imagen 3 de 3

    • Decrimp the wire nuts from both wire connections.

    • Remove wire nuts to expose wire strands.

    • Separate all connected wires.

    Traducir

  6. Holmes HEH8031 Power Cord Replacement: paso 5, imagen 1 de 3 Holmes HEH8031 Power Cord Replacement: paso 5, imagen 2 de 3 Holmes HEH8031 Power Cord Replacement: paso 5, imagen 3 de 3

    • Pull on the cord from the outside of the heater with great finesse. At the same time, push the cord clamp out of the housing from the inside.

    • Separate the two halves of the cord clamp and remove from cord.

    Traducir

  7. Holmes HEH8031 Power Cord Replacement: paso 6, imagen 1 de 2 Holmes HEH8031 Power Cord Replacement: paso 6, imagen 2 de 2

    • Prepare the replacement cord by cutting the negative branch (black) at least 8 inches shorter than the positive branch (white).

    • Strip at least 3/4 inch of insulation from the cord to expose bare wire.

    • Twist wire ends to form a tight braid.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Deanna Jack

Miembro Desde 10/12/16

333 Reputación

4 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

IUPUI, Team 2-1, Baechle Fall 2016 Miembro de IUPUI, Team 2-1, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G1

4 Miembros

16 Guías creadas

Un comentario

Are there substitute power cord for Holmes HEH8031 power cord replacement?

Terri Allen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 16

Todo El Tiempo: 1,910