Saltar al contenido principal

Hipstreet Equinox 2 Speaker Replacement

Qué necesitas

  1. Hipstreet Equinox 2 Speaker Replacement, Rear Case: paso 1, imagen 1 de 1
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Speaker Replacement: paso 2, imagen 1 de 1
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Speaker Replacement, Speaker: paso 3, imagen 1 de 1
    • Use a plastic opening tool to remove the speakers from the case.

    • Desolder the wires from the motherboard.

    • Be sure to note which wire, red or black, corresponds to which connection on the motherboard.

  4. Hipstreet Equinox 2 Speaker Replacement: paso 4, imagen 1 de 1
    • Solder the wires of the new speaker to the motherboard as shown in the image.

  5. Hipstreet Equinox 2 Speaker Replacement: paso 5, imagen 1 de 1
    • Glue the speakers flat against their respective sound output panels with the silver sides facing out/towards the interior of the tablet.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Joel Miller

Miembro Desde 01/29/15

119 Reputación

1 Guía escrita

Equipo

Clemson, Team 15-8, Shirley Winter 2015 Miembro de Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

5 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 199