Saltar al contenido principal

Hipstreet Equinox 2 Camera Replacement

Qué necesitas

  1. Hipstreet Equinox 2 Camera Replacement, Rear Case: paso 1, imagen 1 de 1
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Camera Replacement: paso 2, imagen 1 de 1
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Camera Replacement, Camera: paso 3, imagen 1 de 1
    • Lift the tab on the wire ribbon shown here

  4. Hipstreet Equinox 2 Camera Replacement: paso 4, imagen 1 de 1
    • Pull up gently on the camera housing shown on this picture, it is glued in place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Clemson, Team 15-8, Shirley Winter 2015 Miembro de Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

5 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 121