Repara tus cosas Comunidad Tienda

Health o Meter HDR743 Power Supply Replacement

Qué necesitas

  1. Health o Meter HDR743 Power Supply Replacement, Power Supply: paso 1, imagen 1 de 1

    • Connect a voltmeter at the power supply’s connection to the circuit board and the power supply.

    • If the the voltage at the power supply is incorrect, the power supply should be replaced.

    Editar

  2. Health o Meter HDR743 Power Supply Replacement: paso 2, imagen 1 de 1

    • Use wire strippers to cut the wired connection to the power supply.

    • If the wires need replacing, you will need to use a soldering iron and remove the connections at the board.

    Editar

  4. Health o Meter HDR743 Power Supply Replacement: paso 3, imagen 1 de 1

    • Use the wire strippers to cut off the rubber ends of the power supply wires.

    • Use a soldering iron and solder to fuse the connections between the two wires.

    Editar

  5. Health o Meter HDR743 Power Supply Replacement: paso 4, imagen 1 de 2 Health o Meter HDR743 Power Supply Replacement: paso 4, imagen 2 de 2

    • Test the power supply once the wires have been reconnected.

    • If the Health o Meter still has power issues, check the connections between the new power supply and the board.

    • If no issues are found, the circuit board may need to be replaced.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 117