Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total)
-
Remove the two 7mm screws.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to pull the plastic screen bezel forward.
-
Remove the 4 7mm screws in the corners holding the screen up.
-
Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel off the tape that connects the chord to the screen.
-
Carefully unplug chord.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.