Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to take off the back plastic panel.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To take out the CPU fan it is necessary to disconnect the CPU fan cable. Use a plastic opening tool to remove the cable.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a #0 Phillips head screwdriver to remove the two 7mm screws holding the fan to the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the CPU fan out and replace with the replacement fan.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.