Saltar al contenido principal
  1. Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
    • Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.

  2. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel.
    • Use a plastic opening tool to take off the back plastic panel.

  3. Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.
    • Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.

  4. Gently pry off the connecting wires with the plastic opening tool. Gently pry off the connecting wires with the plastic opening tool.
    • Gently pry off the connecting wires with the plastic opening tool.

  5. Lift the battery out. Lift the battery out.
    • Lift the battery out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Desiree Mora

Miembro Desde 14/02/18

289 Reputación

3 Guías creadas

Equipo

USF Tampa, Team S6-G6, Eyestone Spring 2018 Miembro de USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 90