Hasbro Bop-It Micro Series Battery Replacement

Introducción

There are no previous steps needed. All that is required is a #0 Phillips Screwdriver, (2) fresh AAA batteries, and a few minutes of time.

Unscrew the (2) #4 Phillips head 8 mm screws on the back cover using a Phillips #0 screwdriver. The screws are captured and do not need to be completely removed from the back cover.

The batteries are now accessible. Remove batteries using fingers or plastic spudger.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Miembro Desde 09/29/16

139 Reputación

2 Guías creadas

IUPUI-HARLEY-F16S3G1

3 Miembros

10 Guías creadas

uh can you do one for the 2016 bop it