Repara tus cosas Comunidad Tienda

Harman Kardon Onyx Studio 2 Battery Replacement

Introducción

After completing the prerequisite guide for taking apart the front panel of the speaker, you can then access the battery and replace it when it is dying or not working.

Qué necesitas

  1. Harman Kardon Onyx Studio 2 Battery Replacement, Front Panel: paso 1, imagen 1 de 3 Harman Kardon Onyx Studio 2 Battery Replacement, Front Panel: paso 1, imagen 2 de 3 Harman Kardon Onyx Studio 2 Battery Replacement, Front Panel: paso 1, imagen 3 de 3

    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

    Traducir

  2. Harman Kardon Onyx Studio 2 Battery Replacement: paso 2, imagen 1 de 2 Harman Kardon Onyx Studio 2 Battery Replacement: paso 2, imagen 2 de 2

    • Remove the five 14.4 mm T10 Torx screws.

    Traducir

  4. Harman Kardon Onyx Studio 2 Battery Replacement: paso 3, imagen 1 de 1

    • Gently pull the front apart from the back.

    Traducir

  5. Harman Kardon Onyx Studio 2 Battery Replacement: paso 4, imagen 1 de 2 Harman Kardon Onyx Studio 2 Battery Replacement: paso 4, imagen 2 de 2

    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

    Traducir

  6. Harman Kardon Onyx Studio 2 Battery Replacement, Battery: paso 5, imagen 1 de 3 Harman Kardon Onyx Studio 2 Battery Replacement, Battery: paso 5, imagen 2 de 3 Harman Kardon Onyx Studio 2 Battery Replacement, Battery: paso 5, imagen 3 de 3

    • Begin by removing the three 10.4 mm T10 Torx screws from the battery cover.

    • Remove battery cover.

    • Pull battery out to replace.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

44 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Alexandra Achtenberg

Miembro Desde 02/02/17

2,031 Reputación

6 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

USF Tampa, Team 16-5, Blackwell Spring 2017 Miembro de USF Tampa, Team 16-5, Blackwell Spring 2017

USFT-BLACKWELL-S17S16G5

3 Miembros

24 Guías creadas

21 comentarios

Thanks for the step by step instructions. I have tried replacing the batteries but the speaker still won't turned on. I believe the battery cable/module is broken, do you know how to fix it? Thanks.

Wompy Pratomo - Contestar

Can you put a step by step instruction how to replace a battery on a Harman/ Kardon esquire 2?

Bullet Magnet - Contestar

Hello, what kind of battery is good for replacement? I'm thinking of using LG 3000mAh or Panasonic 3400 mAh (both unprotected) and making a direct swap. Help please

marcel - Contestar

Can you tell me what kind of the hk onyx speaker battery's, if you can show me step instructions to replace! Thankyou!

happymandm8 - Contestar

This worked great. Thanks. Battery would not charge. Bought a replacement on Ebay and now it works as if new.

JSM - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 81

Ultimos 30 días: 396

Todo El Tiempo: 88,108