Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

After completing the prerequisite guide for taking apart the front panel of the speaker, you can then access the battery and replace it when it is dying or not working.

  1. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device. Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.
    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

    Where can I find a new front panel for my speaker

    consomme69 - Contestar

    If I take this off can I put it back on

    Burger King - Contestar

  2. Remove the five 14.4 mm T10 Torx screws. Remove the five 14.4 mm T10 Torx screws.
    • Remove the five 14.4 mm T10 Torx screws.

  3. Kit de Destornilladores Manta

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de Destornilladores Manta

    Upgrade Your Toolbox
  4. Gently pull the front apart from the back.
    • Gently pull the front apart from the back.

  5. Remove the four wires connecting the front and back panels. Pinch the connector tab and pull gently upwards.
    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

  6. Begin by removing the three 10.4 mm T10 Torx screws from the battery cover. Remove battery cover. Pull battery out to replace.
    • Begin by removing the three 10.4 mm T10 Torx screws from the battery cover.

    • Remove battery cover.

    • Pull battery out to replace.

    What battery is the replacement? Are there one or two batteries inside? Could have been a good “how to instruction” but left out some important facts. Duh?

    David Forster - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

26 personas más completaron esta guía.

Equipo

USF Tampa, Team 16-5, Blackwell Spring 2017 Miembro de USF Tampa, Team 16-5, Blackwell Spring 2017

USFT-BLACKWELL-S17S16G5

3 Miembros

13 Guías creadas

Thanks for the step by step instructions. I have tried replacing the batteries but the speaker still won't turned on. I believe the battery cable/module is broken, do you know how to fix it? Thanks.

Wompy Pratomo - Contestar

Can you put a step by step instruction how to replace a battery on a Harman/ Kardon esquire 2?

Bullet Magnet - Contestar

Hello, what kind of battery is good for replacement? I'm thinking of using LG 3000mAh or Panasonic 3400 mAh (both unprotected) and making a direct swap. Help please

marcel - Contestar

Can you tell me what kind of the hk onyx speaker battery's, if you can show me step instructions to replace! Thankyou!

happymandm8 - Contestar

This worked great. Thanks. Battery would not charge. Bought a replacement on Ebay and now it works as if new.

JSM - Contestar

Hello,

Where I can buy those 14.4 mm T10 Torx screws online?

Levan Rozomashvili - Contestar

Hello

What is the battery for the Harman Kardon Esquire 2 speaker?

Regards

Isaac Moura - Contestar

Pls where can I get a battery?

Emmanuel - Contestar

My onyx is onyx studio

Emmanuel - Contestar

Here is where you can find a good battery. https://www.ebay.com/itm/192530902153

tkuan - Contestar

What if the wires connected to the battery were splice for another battery hook up .and a wire on the battery broke and my charging ports are no good what can i do

Karlos milliar - Contestar

Is it possible to use just the power supply

Carbon cookie - Contestar

Anyone know the model of the 3-pin connector on the battery?

Sagar - Contestar

The battery of onix 2 could work to Harman kardon onix 1?

orlandinez - Contestar

Thank you for the guide as it is very helpful! Here's the replacement battery needed for the Onyx Studio 2. It's brand new, it comes with all the necessary installation tools and it has a 1 year warranty! Onyx Studio 2 Replacement Battery

Mike - Contestar

Buen día, necesito orientación respecto a una HK onyx studio 3, no logro conseguir la batería, sería el mismo modelo que el que sugieren aquí?

gio ram - Contestar

Thanks for the easy replacement instructions. Our school bought 4 of the 1st generation HK Onyx speakers and all 4 batteries bit the dust this year. It was a breeze to find better replacements than the original on Amazon and Ebay and these instructions gave me the confidence to disassemble, replace, and reassemble the speakers. Everybody thinks I’m a genius. Thanks again.

Bobby Hirschhorn - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 175

Ultimos 30 días: 1,197

Todo El Tiempo: 48,195