Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
If the LED lights do not function after troubleshooting, you might need to change the LED Board. For this replacement you need a Phillips #2 screw driver and a metal spudger.
Qué necesitas
-
-
Use a metal spudger to remove the top cover.
-
Use a Phillips #2 screwdriver to remove three 17 mm screws.
-
-
Casi Terminas!
To reassemble your device, follow these instructions in reverse order.
Conclusión
To reassemble your device, follow these instructions in reverse order.