Repara tus cosas Comunidad Tienda

Hamilton-T1 Air Intake and Fan Filter Replacement

Equipo médico
El fabricante de este equipo médico no ha avalado o contratado a iFixit ni a esta guía de reparación.

Introducción

This guide was created to assist in either the replacement or maintenance of the various filters contained within the ventilator. Regular checks and maintenance will allow for smooth operation of the ventilator.

NOTES:

  • The side fan filter and rear intake filter can be replaced or washed with soap and water before reuse
  • The HEPA filter must be replaced

Qué necesitas

  1. Hamilton-T1 Air Intake and Fan Filter Replacement, Air Intakes and HEPA Filter: paso 1, imagen 1 de 1

    • The fan filter is located on the side of the ventilator and can be removed and replaced by hand.

    Traducir

  2. Hamilton-T1 Air Intake and Fan Filter Replacement: paso 2, imagen 1 de 1

    • The air intake filter is located on the rear of the device, and can also be removed by hand.

    Traducir

  3. Hamilton-T1 Air Intake and Fan Filter Replacement: paso 3, imagen 1 de 1

    • To access the HEPA filter, first remove the screw holding the filter cover in place and gently remove the cover.

    Traducir

  4. Hamilton-T1 Air Intake and Fan Filter Replacement: paso 4, imagen 1 de 1

    • The HEPA filter can now be removed by hand.

    • Install a new HEPA filter and reattach the back panel.

    • Be sure to test the device and ensure airflow through all filters before use.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Trevor Foley

Miembro Desde 04/10/20

114 Reputación

1 Guía escrita

Insignias: 3

Equipo

Cal Poly, Team S11-G24, Paton Spring 2020 Miembro de Cal Poly, Team S11-G24, Paton Spring 2020

CPSU-PATON-S20S11G24

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 13

Ultimos 30 días: 22

Todo El Tiempo: 615