Saltar al contenido principal

Hamilton Beach 70730 Drive Shaft Replacement

Qué necesitas

  1. Hamilton Beach 70730 Drive Shaft Replacement, Bowl: paso 1, imagen 1 de 1
    • Unscrew the cover by turning it counterclockwise.

  2. Hamilton Beach 70730 Drive Shaft Replacement: paso 2, imagen 1 de 1
    • Grab the scraper by the midsection to remove.

  3. Hamilton Beach 70730 Drive Shaft Replacement: paso 3, imagen 1 de 1
    • Carefully remove the blades by lifting them off of the blade shaft.

  4. Hamilton Beach 70730 Drive Shaft Replacement: paso 4, imagen 1 de 1
    • Rotate the bowl counterclockwise to release it from the base.

  5. Hamilton Beach 70730 Drive Shaft Replacement: paso 5, imagen 1 de 1
    • Make sure there is no food or grime along the outside of the bowl or the base.

  6. Hamilton Beach 70730 Drive Shaft Replacement, Drive Shaft: paso 6, imagen 1 de 1
    • Using the metal spudger, remove the four adhesive plastic covers that hide the screws.

    • These covers are adhered to the screws.

  7. Hamilton Beach 70730 Drive Shaft Replacement: paso 7, imagen 1 de 1
    • Remove any excess glue that is adhered to the screws with the precision tweezers.

  8. Hamilton Beach 70730 Drive Shaft Replacement: paso 8, imagen 1 de 1
    • Using a JIS #1 driver, remove the four 10 mm screws.

  9. Hamilton Beach 70730 Drive Shaft Replacement: paso 9, imagen 1 de 1
    • Lift the driveshaft off of the base.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Mack Bernard

Miembro Desde 03/08/16

597 Reputación

5 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 15

Todo El Tiempo: 935