Hamilton Beach 51101BA Power Cord Replacement

Introducción

In this guide you are going to learn how to take out the current power cord in order to replace it with a new one.

Qué necesitas

Paso 1 Power Cord

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: paso 1, imagen 1 de 3

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: paso 1, imagen 2 de 3

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: paso 1, imagen 3 de 3

Remove container from base.
Hold the blender and the container, then twist the container in a clockwise motion.
Make sure to follow the lock and unlock markings on the container.

Traducir

Paso 2

Turn the blender so the bottom is facing you.
Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.

Traducir

Paso 3

Lift the two wires from the motor platform.

Traducir

Paso 4

Using the wire cutters, cut the end of the thick black wires.

Traducir

Conclusión

To reassemble your device, you must solder the new power cord to the thin black and thin gray wires, and follow the steps in reverse order. Requires soldering skills.

Una persona más ha completado esta guía.