Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
To expose the battery, remove the outer case with your fingernail.
-
Remove the battery by pulling the black tab.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Spudger$3.99-
Insert the flat end of the spudger into the two notches on the back of the camera cover and pry them up.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Spudger$3.99-
Work the spudger around the edges of the camera cover until it comes off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:T5 Torx Screwdriver$5.49-
Remove the four 6 mm screws with the T5 Torx screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the flat end of an iFixit opening tool between the side and inner covers to create a gap.
-
Work the tool around the edges until all the clips release.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once all the clips are open, remove the inner panel from the phone.
-