Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide will display how to remove and install the back panel of the HTC Wizard 200.
Qué necesitas
-
-
To expose the battery, remove the outer case with your fingernail.
-
Remove the battery by pulling the black tab.
-
-
-
Use a spudger to begin removal of the camera cover by inserting the flat end into the two notches and gently pry them up one at a time.
-
-
-
Herramienta utilizada en este paso:T5 Torx Screwdriver$5.49
-
Use a T5 Torx screwdriver to remove four 6mm screws that secure the back panel to the main body.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.