Introducción

Make sure you complete previous guide.

  1. Power the phone off.
    • Power the phone off.

    • Use your thumb to gently press downward and away from the camera to remove the battery cover.

    Agregar Comentario

  2. Pull on the plastic tab to release the battery.
    • Pull on the plastic tab to release the battery.

    Agregar Comentario

    • Use a plastic opening tool to remove the camera cover.

    • Work around the corners to avoid breaking the plastic clips that hold the camera cover on.

    • Lift the camera cover off of the phone.

    Agregar Comentario

    • Remove the stylus from the phone.

    • Remove the four 5.5 mm screws with the T6 Torx Screwdriver.

    • One of the screws might be under a sticker, which will void your warranty.

    Agregar Comentario

    • Be Careful! Do not insert the spudger in between the keyboard and screen. This could break the keyboard off the phone.

    • If your phone contains a memory card, you may want to remove it before proceeding with this step.

    • Insert spudger in the bottom corner as seen in the picture. Carefully slide the spudger from the bottom towards the top as seen in the second picture.

    • Lift the back case off completely.

    • The speakers might be dangling and unsecured.

    Agregar Comentario

    • Grip the speaker connector with your thumb and finger and gently pull up.

    • Repeat for 2nd speaker.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Taylor Stone

Miembro Desde 06/10/11

45 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 20-28, Maness Fall 2011 Miembro de Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 491