By removing the back plate and disconnecting the bus for the camera, replacing it isn't difficult.

Power the phone off.
  • Power the phone off.

  • Use your thumb to gently press downward and away from the camera to remove the battery cover.

Agregar Comentario

Pull on the plastic tab to release the battery.
  • Pull on the plastic tab to release the battery.

Agregar Comentario

  • Use a plastic opening tool to remove the camera cover.

  • Work around the corners to avoid breaking the plastic clips that hold the camera cover on.

  • Lift the camera cover off of the phone.

Agregar Comentario

  • Remove the stylus from the phone.

  • Remove the four 5.5 mm screws with the T6 Torx Screwdriver.

  • One of the screws might be under a sticker, which will void your warranty.

Agregar Comentario

  • Be Careful! Do not insert the spudger in between the keyboard and screen. This could break the keyboard off the phone.

  • If your phone contains a memory card, you may want to remove it before proceeding with this step.

  • Insert spudger in the bottom corner as seen in the picture. Carefully slide the spudger from the bottom towards the top as seen in the second picture.

  • Lift the back case off completely.

  • The speakers might be dangling and unsecured.

Agregar Comentario

  • Locate the camera and pry off with the plastic opening tool or spudger.

Agregar Comentario


To reassemble your device, follow these instructions in reverse order.

Kevin Gingrich

Miembro Desde 06/10/11

172 Reputación

2 Guías creadas


Cal Poly, Team 20-28, Maness Fall 2011 Miembro de Cal Poly, Team 20-28, Maness Fall 2011


4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 695