Partes

No se requieren partes.

Take the back cover off the phone and take the battery out.
  • Take the back cover off the phone and take the battery out.

Agregar Comentario

Take a SL#2.5 screwdriver and pop the black piece off shown here.
  • Take a SL#2.5 screwdriver and pop the black piece off shown here.

Agregar Comentario

  • Take a T5 screwdriver and unscrew the two screws seen here

Agregar Comentario

  • Unscrew the two screws on the back of the phone with a T5 screwdriver

Agregar Comentario

  • Take the SL#2.5 screwdriver and pry off the back cover

  • The phone should now look like the second picture

Agregar Comentario

  • Next lift up the camera lens from the board.

  • Then pry off the circuit circled in red on the second picture

Agregar Comentario

  • Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone

  • The circuit board should now be detached from the LCD part of the phone

Agregar Comentario

  • Next take the SL#2.5 screwdriver and pry the grey fabric sticker off on the LCD side of the phone

Agregar Comentario

  • Next take the SL#2.5 screwdriver and pry the screen from the front plastic cover

  • The screen should come out with ease and be completely detached from the rest of the cover.

Agregar Comentario

  • Replace screen with a new one.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Meuwissenm

Miembro Desde 04/10/11

16 Reputación

1 Guía escrita

Equipo

UW Stout, Team 5-3, Zhou Fall 2011 Miembro de UW Stout, Team 5-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G3

4 Miembros

3 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,343