Partes

No se requieren partes.

  1. Flip the phone over to have the rear cover facing up.
    • Flip the phone over to have the rear cover facing up.

      • The camera lens should be towards the top of the phone.

    Agregar Comentario

  2. Slide the cover up, towards the top of phone, to unlock the battery cover.
    • Slide the cover up, towards the top of phone, to unlock the battery cover.

    • Lift the cover off phone and remove it.

    Agregar Comentario

    • Use your finger to push the top of the battery downwards and lift the battery out of the phone.

    Agregar Comentario

    • Remove the six Torx #5 screws that are securing the rear frame.

    Agregar Comentario

    • Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic opening tool.

      • A plastic card can be used instead of the plastic opening tool.

    Agregar Comentario

    • Remove the single Phillips #0 screw that is securing the motherboard to the front case of the phone.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Pry the motherboard away from the front of the plastic case using a plastic opening tool.

      • Be careful not to break the ribbon cable when prying away the motherboard.

    Agregar Comentario

    • Remove the plastic cover from the LCD display and the motherboard.

      • The Motherboard and the LCD are still attached together.

    Agregar Comentario

    • Remove the gray tape securing the ribbon cable.

    Agregar Comentario

    • Remove the yellow tape securing the connector lock.

    Agregar Comentario

    • Carefully lift the black lock to release the ribbon cable, using the plastic opening tool.

    Agregar Comentario

    • Pull the ribbon cable upwards, disconnecting it from the Motherboard.

    Agregar Comentario

    • Lift the Motherboard away from the LCD display.

    Agregar Comentario

    • Lift off main keyboard from front plastic case using plastic opening tool.

    Agregar Comentario

    • Remove four Phillips #00 screws securing function keys.

    Agregar Comentario

    • Pop keys out by pushing keys from back of the phone.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Marco Jokada

Miembro Desde 28/04/11

247 Reputación

6 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,659