Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

HTC Maple 100 Front Panel Replacement

Qué necesitas

  1. HTC Maple 100 Front Panel Replacement, Battery: paso 1, imagen 1 de 1
    • First remove the back cover of your phone to expose the battery.

  2. HTC Maple 100 Front Panel Replacement: paso 2, imagen 1 de 1
    • Turn the phone over.

    • Push forward on the battery with your thumb.

  3. HTC Maple 100 Front Panel Replacement: paso 3, imagen 1 de 2 HTC Maple 100 Front Panel Replacement: paso 3, imagen 2 de 2
    • Take the battery out by lifting it upwards.

    • When reassembling, make sure that the battery contacts match up.

  4. HTC Maple 100 Front Panel Replacement, Back Panel: paso 4, imagen 1 de 2 HTC Maple 100 Front Panel Replacement, Back Panel: paso 4, imagen 2 de 2
    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.

  5. HTC Maple 100 Front Panel Replacement: paso 5, imagen 1 de 1
    • Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.

  6. HTC Maple 100 Front Panel Replacement: paso 6, imagen 1 de 3 HTC Maple 100 Front Panel Replacement: paso 6, imagen 2 de 3 HTC Maple 100 Front Panel Replacement: paso 6, imagen 3 de 3
    • Insert the plastic opening tool along the seams at different points to it pry the clips off.

    • This may require a bit of force. The USB port cover may fall off in this step.

  7. HTC Maple 100 Front Panel Replacement, Motherboard: paso 7, imagen 1 de 2 HTC Maple 100 Front Panel Replacement, Motherboard: paso 7, imagen 2 de 2
    • Remove the one 3.3mm Phillips #00 screw.

  8. HTC Maple 100 Front Panel Replacement: paso 8, imagen 1 de 2 HTC Maple 100 Front Panel Replacement: paso 8, imagen 2 de 2
    • Use your finger or the plastic opening tool to unclip the board.

    • Be aware of the ribbon cable connected to the motherboard inside the phone.

  9. HTC Maple 100 Front Panel Replacement: paso 9, imagen 1 de 2 HTC Maple 100 Front Panel Replacement: paso 9, imagen 2 de 2
    • Peel off the yellow piece of tape from the phone.

  10. HTC Maple 100 Front Panel Replacement: paso 10, imagen 1 de 3 HTC Maple 100 Front Panel Replacement: paso 10, imagen 2 de 3 HTC Maple 100 Front Panel Replacement: paso 10, imagen 3 de 3
    • Flip up the retaining flap with your fingernail or a plastic opening tool.

    • Pull on the ribbon cable gently with your fingers.

  11. HTC Maple 100 Front Panel Replacement: paso 11, imagen 1 de 2 HTC Maple 100 Front Panel Replacement: paso 11, imagen 2 de 2
    • Split apart the motherboard and front panel.

    • Remove the other yellow piece of tape off of the end of the ribbon cable.

  12. HTC Maple 100 Front Panel Replacement: paso 12, imagen 1 de 2 HTC Maple 100 Front Panel Replacement: paso 12, imagen 2 de 2
    • Gently pull on the ribbon cable to separate the motherboard.

  13. HTC Maple 100 Front Panel Replacement, Keyboard: paso 13, imagen 1 de 2 HTC Maple 100 Front Panel Replacement, Keyboard: paso 13, imagen 2 de 2
    • Remove the four 1.9 mm Phillips #00 screws.

  14. HTC Maple 100 Front Panel Replacement: paso 14, imagen 1 de 1
    • Peel back the tape gently.

  15. HTC Maple 100 Front Panel Replacement: paso 15, imagen 1 de 1
    • Remove the board gently.

  16. HTC Maple 100 Front Panel Replacement: paso 16, imagen 1 de 2 HTC Maple 100 Front Panel Replacement: paso 16, imagen 2 de 2
    • Remove the keys carefully.

  17. HTC Maple 100 Front Panel Replacement, Front Panel: paso 17, imagen 1 de 3 HTC Maple 100 Front Panel Replacement, Front Panel: paso 17, imagen 2 de 3 HTC Maple 100 Front Panel Replacement, Front Panel: paso 17, imagen 3 de 3
    • Using the Plastic Opening Tool, pry out the LCD screen and remove with fingers.

    • Be gentle because the LCD screen is fragile.

  18. HTC Maple 100 Front Panel Replacement: paso 18, imagen 1 de 3 HTC Maple 100 Front Panel Replacement: paso 18, imagen 2 de 3 HTC Maple 100 Front Panel Replacement: paso 18, imagen 3 de 3
    • Use the Plastic Opening Tool to remove the internal ear speaker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 20-29, Maness Fall 2011 Miembro de Cal Poly, Team 20-29, Maness Fall 2011

CPSU-MANESS-F11S20G29

4 Miembros

18 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 744