Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

This guide will teach you how to replace the external speaker on your phone. The external speaker is the speaker that is used for louder noises produced from your phone such as music. This is different from the ear speaker that you hear during phone calls.

  1. First remove the back cover of your phone to expose the battery.
    • First remove the back cover of your phone to expose the battery.

  2. Turn the phone over.
    • Turn the phone over.

    • Push forward on the battery with your thumb.

  3. Take the battery out by lifting it upwards. When reassembling, make sure that the battery contacts match up.
    • Take the battery out by lifting it upwards.

    • When reassembling, make sure that the battery contacts match up.

  4. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  5. Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone. Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.
    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.

  6. Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.
    • Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.

  7. Insert the plastic opening tool along the seams at different points to it pry the clips off. This may require a bit of force. The USB port cover may fall off in this step. This may require a bit of force. The USB port cover may fall off in this step.
    • Insert the plastic opening tool along the seams at different points to it pry the clips off.

    • This may require a bit of force. The USB port cover may fall off in this step.

  8. Using the plastic opening tool, pry the external speaker out of the back panel. Using the plastic opening tool, pry the external speaker out of the back panel.
    • Using the plastic opening tool, pry the external speaker out of the back panel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Alyssa Thompson

Miembro Desde 04/10/11

11 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 20-29, Maness Fall 2011 Miembro de Cal Poly, Team 20-29, Maness Fall 2011

CPSU-MANESS-F11S20G29

4 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 787